Your PLC already has the data. Tell NEQTO.ai what to do with it.

NEQTO.ai is an autonomous operations platform. It reads data from your machines, organizes it, and acts on it using rules you set.

30-day free trial of the Business package. No credit card required.

NEQTO.ai/Assistant

Alert me when compressor 3 runs over temperature for 10 minutes, then shut it down.

Here is a draft. Review it before it goes live.

CONDITIONplc-line-2 · comp3_temp over limit · 10 min

ALERTNotify operations team

COMMANDSend stop command to plc-line-2

ConfirmEdit

Nothing takes effect until you confirm.

Where the time goes

Getting data out of a PLC is one thing. Making it useful is another.

Your PLCs and controllers already hold the readings. The engineering time goes into what comes after: getting those values off the controller, parsing and mapping them, then building the dashboards, alert logic and integrations that let people act on them.

How it works

Three steps from PLC data to action

01 / 03

Add a gateway to your PLC

An HPE Networking Gateway converts your PLC’s existing machine data to MQTT and sends it to NEQTO.ai. That is all you need to start reading organized data in the platform.

From the first message, NEQTO.ai suggests field names and units for you to confirm.

WHAT YOU NEED

Your PLCHPE Networking GatewayA NEQTO.ai account

plc-line-2 · HPE Networking Gateway · MQTTFirst message received

FIELDUNITSUGGESTED NAME

comp3_temp°CCompressor 3 temperature

comp3_runon/offCompressor 3 running

line2_rateunits/hLine 2 output rate

Show compressor 3 temperature for today, and email me a summary every Friday.

Widget Compressor 3 temperature, todayDraft

Report Weekly summary, FridaysDraft

Confirm both

02 / 03

Describe what you need

Ask in plain language for an alert, a dashboard, a report or an integration. NEQTO.ai drafts it from your device data and shows it to you before anything goes live.

03 / 03

NEQTO.ai builds it and acts on it

When a condition you defined is met, NEQTO.ai sends the command to your equipment through an existing integration, then monitors the result.

42CONDITIONcomp3_temp over limit, 10 min
42ALERTOperations team notified
42COMMANDstop sent to plc-line-2
43RESULTcomp3_run reads off

What you can ask for

Say it the way you would say it to a colleague

Alerts

"Alert me when Press 02 vibration goes over 8 mm/s and bearing temperature goes over 80 °C."

Machine control

"Alert me when compressor 3 runs over temperature for 10 minutes, then shut it down."

Dashboards

"Chart the line 2 PLC temperature readings for today."

Reports

"Send me a weekly alerts report every Friday at 5pm."

You stay in control

NEQTO.ai acts on the rules you set, and only those

Before anything runs on your equipment, a person on your team has defined it and confirmed it.

You define what a fault is

NEQTO.ai works from the conditions and limits your team provides.

Every draft waits for you

Alerts, dashboards and integrations drafted by AI take effect only after a person confirms them.

Commands follow your rules

Equipment commands run from rules set in advance, through integrations you already use.

Findings come to you first

NEQTO.ai learns from your data and brings what it finds to you for approval before acting on it.

See it in action

From a line's existing PLC to action

An HPE Networking Gateway reads the existing PLC on Line A and sends the data to NEQTO.ai. When Press 02 starts to fail, NEQTO.ai writes back to stop the line and send RepoBot.

See what you can build from your machine data

First-time users get a 30-day free trial of the Business package with 5,000 AI credits and custom integrations. No credit card required. Offer ends 11/02/2026.